Peak Moor Sandstone Typical Variations

The top six samples shown on the above variation photo show a rubbed/ashlar finish. The bottom left sample shows a sandblasted finish. The bottom centre sample shows a pitched/rock faced walling finish. The variations shown in the above sample panel are indicitive of the different variations commonly found in Peak Moor Sandstone. As sandstone is a natural product it is not possible to guarantee the inclusion or exclusion of any natural variations within newly cut sandstone units.

Technical Data* for Peak Moor Sandstone

*Please note that as natural stone is a natural product there can be variations in the composition of the stone that would result in these test results varying across the raw material. These results are an average taken from the testing of multiple samples taken from several quarried blocks. Cumbrian Stone would always recommend consulting a structural engineer to establish the minimum required properties where natural stone is being used for structural purposes, and the results contained on this sheet are not to be taken as a structural recommendation in any case.